Operating The Receiver - Panasonic TU-PTA100E Operating Instructions Manual

QUICK START GUIDE
3

Operating the receiver

#
$
Land
Deutschland
Österreich
France
Italia
España
Nederland
Danmark
Sverige
Norge
Suomi
Belgien
Schweiz
E.Eu
OSD Sprache
Deutsch
Start ATP
Select your country For Switzerland and Belgium,
Press the red button
&
BIf the VCR has not accepted download data from the receiver, you may need to select the Download option from the VCR's
menu.
BIf Q - LInk is not operating correctly, check it is connected to the receiver's AV2 socket, the SCART lead is a "full function"
type, and the VCR is compatible with Q - Link,
BFor further information on Q - Link and connecting equipment, see pages 24, 28 and 29.
6
Auswählen
Auswählen
Suchlauf Abbruch
select the desired language
Adjust
Volume
NEXTVIEWLINK
First, ensure that the VCR is in Standby mode.
Plug in receiver and switch on
%
CH44
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
Stored : CH44 XYZ
02
TV/AV : To exit
Auto setup will begin, your stations will be located and stored.
If a compatible VCR is connected to the AV2 socket,
programme data will be downloaded to the VCR via Q-Link.
See page 24.
If you are installing a new Q-Link
compatible VCR, you can now switch it ON.
Downloaded tuning data will match the
receiver's.
If you are installing a new
compatible VCR, you will need to initiate
download manually.
See the VCR handbook for details.
Change Channel
or similar technologies. Ask your dealer for further details.
99:21 41
NEXTVIEWLINK