Table of Contents
Advertisement
GETTING STARTED
Connecting
the HDTV
Digital
Receiver
to Dolby
Digital
decoder
Use the following diagram to connect Dolby Digital output of your HDTV Digital Receiver to a Dolby Digital decoder.
Digital Audio Out (Dolby Digital)
Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete full-bandwidth
channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency Effect) subwoofer
channel. For a full Home Theater sound experience, an external Dolby Digital decoder and a multichannel amplifier must
be connected to the HDTV Digital Receiver.
DolbyDigital
Decoder
Note: Cables not included.
F
Optical Cable
_
f
%%..,
In_nlflg
signal
f_om antenna or
cable
DATA
(OPTICAL)
IN
I-
6 - channel Amplifier
I
& Speakers
I
L
t
DIGITAL
I
7
I
AUDIO IN
E
I]_
(DOLBY
DIGITAL) I t
HD'FV Digital Receiver
Pb
i
S-VIDEO
P,
:®
#
I -o;
TM
DTV Terminals On
Back of TV
o]
AC IN
Procedure
{3
Connect the Digital Audio cable from the Digital Audio
Out connection on the HDTV Digital Receiver to the Digital Audio In
connection on the Dolby Digital decoder.
D
If using a HDTV monitor, use component video cables to connect the TV to the HDTV Digital Receiver
0
If using a conventional TV use either composite video or S-Video cable to connect the TV to the HDTV Digital Receive[
14e
Advertisement
Table of Contents
