Optional Equipment Connection & Operation; Stereo Connection (To Audio Amp); Video/Audio Connection - Panasonic CT-31SF12T Operating Instructions Manual

Optional Equipment Connection and Operation
To Audio AMP Connection (Stereo)
TERMINALS ON BACK OF RECEIVER
o S-VIDEO
v,o°o® ®
A2,O ® ®
INPUT -- 1-- 2
To Auxiliary Input I
• To Audio AMP
Connect to an external audio amp auxiliary input for monitoring sound through a stereo system.
NOTE: 'q-o AUDIO AMP" terminals cannot be used for external speakers.
Adjustment - When an audio amp is connected to 'qO AUDIO AMP" terminals:
1. Select INT. SPEAKERS "ON" Mode. (Refer to the Audio Menu [TV] Speakers section.)
.2 Set volume of audio amp to near minimum.
3. Adjust volume of TV to desired listening level.
4. Adjust volume of audio amp to match the level of TV.
5. Select INT. SPEAKERS "OFF" Mode. (Refer to the Audio Menu [TV] Speakers section.)
.6. Audio bass, treble, balance, volume and mute can now be controlled by the TV Remote Control.
Video/Audio Connection
VCR or VIDEO DISC
S_VIDEO O,
,a
l
!
!
6
AUDIO OUT
!
!
TERMINALS ON
BACK OF VCR
TERMINALS ON BACK OF RECEIVER
F _- S-VIDEO
®
AUDIO
INPUT m 1 _ 2
_i_-- TO AUDIO
AMP
I
(_ ANT
Operation
1. Connect optional equipment as shown to INPUT 1 or 2.
:2. Select the desired Video mode by pressing the TV/VIDEO button (or refer to the Input Selection Menu).
NOTE: You must select the same VIDEO Mode that the equipment is connected to.
:3. Operate optional equipment (VCR-VDP) as instructed in Optional Equipment manual.
- 32-