Tv/Video Button; Recall Button; R-Tune (Rapid Tune) Button; Multi Button - Panasonic CT-31SF12T Operating Instructions Manual

TV/Video Button
- Press the TV/VIDEO button
to select desired input.
W/VIDEO
Signal connected to:
REAR VIDEO/AUDIO INPUT 2 JACKS-_ 1 VIDEO 2 I
REAR VIDEO/AUDIO _ VIDEO 1 I I
INPUT 1 JACKS | , ,,I I
TV or CABLE _ CH 02 I I I
Recall Button
- Press the RECALL button to
review:
• Audio Mode status
• CH number or Video Input selected
• Sleep Timer status
• Clock time
• Channel Caption (Station Identifier)
RECALL
SAP CH 03
MONO XYYZ
29 1:00
R-Tune (Rapid Tune) Button - Press the
R-TUNE (RAPID TUNE) button to instantly switch
between the last two channels selected (without any On
Screen display being activated).
R-TUNE
CHANNEL NOW CHANNEL TUNED
BEING VIEWED IMMEDIATELY BEFORE
Press Button
i=,.
r
Press Button Again
!
-9-
Multi Button
The MULTI button can be programmed to operate up
to 6 Remote function buttons at the same time.
For Example: TV Power/On, VCR Power/On (selected
brands) can be operated at the same time with one press
of the MULTI button.
Procedure
1. First program the Remote for the selected VCR
Infra-red access code. Confirm that the Remote
Control is compatible with the equipment.
2. Face the Remote Control transmitter away from all
equipment remote sensors.
3. Press the Remote TV POWER button and the
MULTI button simultaneously. (All previous
commands are erased.)
(TV)
POWER MULTI
PRESS SIMULTANEOUSLY
4. Press a maximum of 6 Function buttons on the
Remote.
Each button you press is equal to one function. If six
remote button functions are entered, all will register
in the MULTI button memory in the sequence
entered. When less than six remote button functions
are entered, press the MULTI button to end the
program mode. (Waiting more than 30 seconds
without pressing another button will also end the
program mode.)
The following is an example of Remote functions
that can be programmed into the MULTI button.
- TV Power- For turning TV ON and OFF.
- VCR Power - For turning VCR ON and OFF
(selected brands after programming it's Infra-red
access code, if necessary).
Both can be turned ON or OFF with one press of the
MULTI button.
(-r_,) VCR
POWER
POWER MULTI
To delete entered functions - Press the Remote
TV POWER and MULTI buttons simultaneously.
Now you can enter from one to six different Remote
functions. (TV)
POWER MULTI
PRESS SIMULTANEOUSLY
NOTE:
You can also program the MULTI button to perform
most individual Remote Control button functions.
Buttons which continuously perform a function as
long as pressed (Volume Up/Down, Channel
Up/Down, etc.) cannot be programmed. Only those
buttons which perform a function when initially
pressed (Power On/Off, Mute, Direct Channel Entry,
etc.) can be programmed.