Optional Equipment Connection And Operation; Stereo Connection (To Audio Amp); Video/Audio Connection - Panasonic CT-27SF13U Operating Instructions Manual

Optional Equipment Connection and Operation
To Audio AMP Connection (Stereo)
TERMINALS ON BACK OF RECEIVER
• To Audio AMP
Connect to an external audio amp auxiliary input tor monitoring sound through a stereo system.
NOTE: '%0 AUDIO AMP" terminals cannot be used for external speakers.
Adjustment - When an audio amp is connected to 'qO AUDIO AMP" terminals:
1. Select SPEAKER "ON" Mode. (Refer to the Audio Menu Speaker section.)
2. Set volume of audio amp to near minimum.
3. Adjust volume of TV to desired listening level.
4. Adjust volume of audio amp to match the level of TV.
5. Select SPEAKER "OFF&VAO" (Variable Audio Out) Mode. (Refer to the Audio Menu Speaker section.)
6. Audio bass, treble, balance, volume, and mute can now be controlled by the TV Remote Control. When "OFF&FAO"
(Fix Audio Out) mode is selected in the Audio Menu, the external amplifier speakers are controlled by the Audio
Amplifier.
Video/Audio Connection
VCR or VIDEO DISC
TERMINALS ON BACK OF RECEIVER
TERMINALS ON
BACK OF VCR
Operation
1. Connect optional equipment as shown to INPU-[ 1 or 2.
2. Select the desired Video mode by pressing the TVNIDEO button (or reler tu the Input Select Meflu).
NOTE: You must select the same VIDEO Mode that the equipment is connected to.
3. Operate optional equipment (VCR-VDP) as instructed in Optional Equipment manual.
-8-