Your Equator Washer-Dryer has been designed to operate with easy maintenance.
Follow these simple maintenance procedures to obtain optimum performance:
1. Ensure that your machine was installed according to the correct installation procedures
detailed in this Manual.
2. Do not use solvents either to clean the machine or to wash clothes.
3. Keep the inside of the detergent dispenser clean;
4. The drain pump of this Washer-Dryer is a self-cleaning pump. It is therefore not
necessary to carry out cleaning and maintenance operations. However, objects (such as
buttons, coins, etc) may sometimes accidentally drop into the pump. Since these can't be
expelled through the drain hose, please remove the cover panel at the bottom of the unit
by holding down on the small tab and pulling the cover down (Fig. 8), remove the pump
cover, and carefully inspect the inside. (Fig.9). Be sure to close the cover after cleaning.
The tab should be gently pulled up until you hear a click.
(Fig.8)
Model
Rated Voltage
Washing input power
Spin input power
Capacity
Spin Speed
Wash programs
Water pressure
Dimensions (HXWXD)
Weight
Model
Rated Voltage
Washing input power
Spin input power
Capacity
Spin Speed
Wash programs
Water pressure
Dimensions (HXWXD)
Weight
20
MAINTENANCE
TECHNICAL DATA
Combo Washer-Dryer Owner's Manual
(Fig.9)
EZ 3720 CEE
110-120V/60Hz
560 W
1050 W
14 lbs.
900 rpm
10
0.05-1(Mpa)
33.5 x 23.5 x 23.2 (inches)
167 lbs.
EZ 1720 V
110-120V/60Hz
560 W
1050 W
14 lbs.
900 rpm
10
0.05-1(Mpa)
33.5 x 23.5 x 23.2 (inches)
167 lbs.