Connecting The Drain Hose - Equator EZ 1710 V Owner's Manual

This appliance m ust be grounded. In the event of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current.
This appliance is equipped with a power cord having an equipment-grounding conductor a nd
a grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
- Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified or service representative or personnel if you are in doubt
as to whether the appliance is properly grounded.
- Do not modify the plug provided with the appliance: if it will not fit the outlet, have a
proper outlet insta lled by a qualified electrician.
CONNECTING TO THE WATER FAUCET
Please read the following steps carefully (Fig.3, Fig.4)
1. Connect the gray end of the hot-water hose to the hot-water faucet (Fig.3).
2. Connect the gray end of the cold-water hose to the cold-water faucet (Fig.3).
3. Connect two pressure -reducing valves [2] to each inlet valve [1] (see Fig.4).
4. Connect the white L-shaped end of hot-water hose to the pressure-reducing valve
connected to the inlet valve marked "H" (Fig.4).
5. Connect the white L-shaped end of cold-water hose to the pressure-reducing valve
connected to the inlet valve marked "C" (Fig.4).

CONNECTING THE DRAIN HOSE

Connect the drain hose to a drain duct (with internal diameter of at least 1.6 inches) or place
it for drainage in to a sink or a tub, ensuring that there are no kinks or bends. The free end
must be at a height of 31.5 inches from the floor, the hose must be fixed in the appropriate
hook on the upper part of the back panel (Fig.4)
10
GROUNDING
WARNINGS
(Fig.3)
Combo Washer- Dryer Owner's Manual
(Fig.4)