Add Mounting Boards - Craftsman 695.22302 Owner's Manual

ADD MOUNTING BOARDS
(Figures 31 and 32)
Fig. 31
c (two)
Place two mounting boards (C) on stand, slots on top and toward the
outside of stand. See Figure 32.
Place clamps into slots in boards. Pivot clamp handles down to tighten
against boards. See Figure 32. Clamping pressure is preadjusted at the
factor,/. If necessary, pressure can be adjusted by tightening screw that
secures clamping lever. See inset.
Fig. 32
Clamp
handle
Turn screw clockwise
to tighten
23