GE Profile 25 Owner's Manual And Installation page 23

Installation Instructions
[_] DISCONNECT THE POWER COUPLING
(on some models)
If the refrigerator has a water dispenser,
there is a power line (harness) from the cabinet
into the bottom hinge on the freezer door that
must be disconnected.
To disconnect, pull apart at the coupling.
Bottom
freezer
hing__
E] DISCONNECT THE ELECTRICAL
CONNECTORS (on some models)
If the refrigerator has a refreshment center,
there are electrical connectors (harnesses)
from the cabinet into the bottom hinge
on the refrigerator door that must be
disconnected.
To disconnect, pull apart each connector.
Bottom
refrigerator
hinge
[_] CLOSE THE FREEZER AND
REFRIGERATOR DOORS
r71 REMOVE THE FREEZER DOOR
r_ Remove the freezer door top hinge cover
(if equipped) bg either squeezing it and pulling
it up or bg prging it off with a plastic puttg
knife.
r_ Remove the two 5/16" or 1/8" hex head
screws, then lift the hinge straight up to free
the hinge pin.
5/16" or 1/8" hex head
r_ open the freezer door to 90 °
c_ _J
I i
I J
J
J
J
i i
J
H J
i
J
90 °
23