GE Profile 25 Owner's Manual And Installation page 17

Trim kits and decorator panels.
For CustomStyle '_models
Read these instructions completely and carefully.
Before You Begin
.Some models ore equipped with trim kits thot ollow you to instoll door ponds. You con order
pre-cut block, white, bisque or stoinless steel decorotor ponds from GE Ports ond Accessories,
800.626.2002, or you con odd wood ponds to motch your kitchen cobinets.
Panels less than 1/4" (6 mm) thick
When installing wood panels less than 1/4" (6 ram) thick, gou need to create a filler panel, such as 1/8"
cardboard, that will fit between the face of the door and the wood panel. If gou are installing the pre-cut
decorator panels, pre-cut filler panels are included in the kit. The combined thickness of the decorator
or wood panel and the filler panel should be 1/4" (6 ram).
Panels 1/4" thick or less
\
1/4" max
/,
3/4" (19 mm) or Raised Panel
A raised panel design screwed or glued to a 1/4" (6 mm) thick backing, or a 3/4" (19 mm) routed board can
be used.The raised portion of the panel must be fabricated to permit clearances of at least 2" (5.1cm) from
the handle side for fingertip clearance.
Panelsthicker than 1/4" (6 mm), up to 3/4" (19 mm) max, will require that the outer 5/16" (8 mm) of panel
perimeter be no thicker than !/4" (6 mm).
Weight limitations for custom panels.
Fresh Food38 Ibs. (! 7 kg) max.
FreezerDoor 28 Ibs.(!5 kg) max.
Panelsthicker than 1/4" (6 mm)
5/16" (8 ram)
1/4" (6 ram) max
5/4" (19 ram)
1/4" (6 ram)
_.,_,_.._ Thick Backing
Door
17
o_
t_
O"
o_
m
0
to
o_
t_
O"
o_
v
0
0
o_
th
0
to
0