GE Profile 25 Owner's Manual And Installation page 19

Inserting the door panels.
Read these instructions completely and carefully.
0 insert the Freezer Panel and Fresh Food Panel.
Carefullg push the freezer panel in until it slides into If gout model has a dispenser,this step onlg applies
the slot behind the door handle. Pushthe filler panel to the fresh food panel and top freezer panel.
(required with some door panels)in behind the
decorator panel. Repeatfor fresh food panel.
0 insert the Bottom Freezer Panel (on dispenser models).
Carefullg push the panel in until it slides into the slot with some door panels)in behind the decorator panel.
behind the door handle. Push the filler panel (required
Attach the Top Trim on the Freezer and Fresh Food Doors.
The Top Trim can be found inside the refrigerator each door. Hand tighten onlg. Hake sure that
compartment, the top of each panel fits snuglg behind the lip
of the Top Trim.
With a T-20 Torxdriver, attach the Top Trim, using
two screws on each Top Trim piece, to the top of
Cut-Out
SideTrim_
t
Side Trim
19
o_
t_
O"
o_
m
0
to
o_
t_
O"
o_
v
0
0
o_
th
0
to
0