GE Profile 25 Owner's Manual And Installation page 29

Installation Instructions
m REPLACE THE BASE GRILLE
Replace the grille bg installing the two Phillips
head screws.
rg] START THE ICEMAKER
Set the icemaker power switch to the ON
position. The icemaker will not begin to operate
until it reaches its operating temperature
of 15°F (-9°C) or below. It will then begin
operation automaticallg. It will take 2-3 dags
to fill the ice bin.
Power. i _ _ _': .... -_
_wi_ch_i .... I J
rs] SET THE CONTROLS
Set the controls to the recommended setting.
5 5
47 4)
[RECOM,ENOEOCONTRO, SE,,,Nosl
0 °F IS RECOMMENDED 37 °F IS RECOMMENDED
29