Connecting The Scanner To Your Computer - Epson GT-10000 User Manual

At this time the carriage will move towards the right slightly and
back to its original position. Next, the fluorescent lamp on the
carriage will flash twice. After a while, the READY indicator lamp
will turn on.

Connecting the Scanner to Your Computer

Unless your PC already has a SCSI board installed, you will need
to install one, along with SCSI driver software. Install the SCSI
board according to the directions included with the board. Also
see "Installing a SCSI Interface Board" on page 1-8.
If your PC has a SCSI board up and running, connect the scanner
as described in the next section.
Note:
You will need to install the SCSI driver that is normally included with
Windows 95/98, or Windows NT 3.51/4.0 (see your system
documentation for instructions), or the driver described in the SCSI
board installation documentation. If you are having errors or poor
performance, an updated driver may help. The latest driver may be
available for download from the Web site of the SCSI board
manufacturer.
1-12
Setting Up the Scanner