Buttons
Button
OPERATE
RESET
a
start
Choosing a Place for the Scanner
Follow the guidelines below when selecting a location for your
scanner:
Place the scanner on a flat, stable surface. The scanner will not
operate properly if it is not level.
Place the scanner close enough to the computer for the
interface cable to reach it easily.
Place the scanner near a wall outlet where the power cord can
be easily unplugged.
Note for French-speaking users:
Placez le scanner près d'une prise de courant où la fiche peut-être
débranchée facilement.
Function
Turns the scanner on and off.
Resets the scanner to its default settings after
an error. Pressing this button while scanning is
in progress stops the scanner and may cause
an error in the scanning software.
Starts the scanning sequence by invoking
PageManager and EPSON TWAIN Pro in a
stand-alone configuration. In a networked
environment it starts the same operation as
the Scan button in EPSON TWAIN Pro Network.
Setting Up the Scanner
1
1-5