Epson Expression 636 Setup Manual page 6

Except as specifically explained in this Setup Guide and the
Online Reference Guide, do not attempt to service the scanner
yourself.
Unplug the scanner and refer servicing to qualified service
personnel under the following conditions:
If the power cord or plug is damaged.
If liquid has entered the scanner.
If the scanner has been dropped or the case damaged.
If the scanner does not operate normally or exhibits a
distinct change in performance. (Do not adjust controls
that are not covered by the operating instructions.)
For Hong Kong and Singapore users:
Replace fuses only with those with of the correct size and
rating.
If you plan to use the scanner in Germany, observe the
following:
To provide adequate short-circuit protection and
over-current protection for this scanner, the building
installation must be protected by a 10 or 16 Amp circuit
breaker.
Note for German-speaking users:
Bei Anschluss des Scanners an die Stromversorgung muss
sichergestellt werden, dass die Gebäudeinstallation mit einer
10A- oder 16 A-Sicherung abgesichert ist.
2
Safety Instructions