Epson 4990 Pro Quick Start Manual
Epson scanner quick start guide
Hide thumbs
Also See for 4990 Pro:
- Brochure (2 pages) ,
- Start here manual (8 pages) ,
- Product information manual (6 pages)
Table of Contents
Advertisement
Quick Links
Start Here
®
Epson Perfection 4990
Unpack Your Scanner
1
Make sure you have all the parts shown below for your Epson scanner:
Note: If you'll be connecting your scanner using IEEE 1394 (FireWire
or iLink
), you'll need to purchase an IEEE 1394 cable (not included).
TM
2
Remove all the packing tape, but leave the large sticker in place until you are
instructed to remove it.
IMPORTANT!
Leave the sticker
in place until you
are instructed to
remove it
3
Insert the hinges on the cover into the square
holes at the back of the scanner.
4
Slide the transportation lock to the unlocked
position.
5
Attach the document mat. Hold the top
of the document mat and slide it down
gently along the document cover. Make
sure the tabs on the bottom and sides of
the document mat fit in the slots on the
document cover.
6
Close the cover.
®
Scanner
CD-ROM with EPSON Scan
driver, software, and
electronic manuals
Adobe
®
Photoshop
®
Elements CD-ROM
LaserSoft Imaging
TM
SilverFast
®
SE CD-ROM
USB cable
CPD-18892
Printed in XXXXXX XX.XX-XX XXX
Scanner cover/transparency unit
Document mat
Film area guide
Film holders
®
Advertisement
Table of Contents
Related Manuals for Epson 4990 Pro
Summary of Contents for Epson 4990 Pro
-
Page 1: Unpack Your Scanner
Start Here ® Epson Perfection 4990 Unpack Your Scanner Make sure you have all the parts shown below for your Epson scanner: CD-ROM with EPSON Scan driver, software, and electronic manuals Adobe Elements CD-ROM LaserSoft Imaging SilverFast USB cable Note: If you’ll be connecting your scanner using IEEE 1394 (FireWire or iLink ), you’ll need to purchase an IEEE 1394 cable (not included). -
Page 2: Install The Software
1 to 3. Then select Adobe Acrobat Reader to install it. Remove the CD-ROM and install the scanner software as described below. Scanner Software Insert the scanner software CD-ROM in the CD-ROM or DVD drive. The installer starts automatically. If it doesn’t start, do the following: •... - Page 3 Remove the CD-ROM and continue with the instructions on the back of this sheet to connect the scanner. Macintosh Note: EPSON Scan does not support the UNIX ® Mac OS X. You must install the software on a disk or in a partition that does not have UFS.
-
Page 4: Scanner Software
Scanner Software Insert the scanner software CD-ROM in the CD-ROM or DVD drive. Double-click the Double-click the Epson icon. At the language selection screen, select your preferred language. When you see the antivirus software message, click Continue. Read the license agreement, then click Agree to continue. -
Page 5: Connect The Scanner
USB port on your computer or hub. Note: Your scanner may not work correctly if you use a USB cable other than the one supplied by Epson or if you connect your scanner through more than one hub. -
Page 6: Scanner Basics
Photoshop Elements. Note: If you don’t like the preview, you can use EPSON Scan to fine-tune the image before scanning. See your Quick Guide or on-screen Perfection 4990 Reference Guide for details. -
Page 7: Digital Ice
Enhancing Your Photos EPSON Scan includes several features to improve your scans, including ™ DIGITAL ICE Technology, Color Restoration, and Dust Removal (for film). For details on using these features, see your Quick Guide booklet or on-screen Perfection 4990 Reference Guide. - Page 8 Fax: (941) 387-7574 * Toll or long distance charges may apply. Epson is a registered trademark of Seiko Epson Corporation. Perfection is a registered trademark and SoundAdvice is a service mark of Epson America, Inc. DIGITAL ICE is a trademark of Kodak.
Need help?
Do you have a question about the 4990 Pro and is the answer not in the manual?
Questions and answers