Sharp FO-K01 Operation Manual page 6

2.4ghz cordless handset
Hide thumbs Also See for FO-K01:
Table of Contents

Advertisement

3
Place the cordless handset in the
charger with the dial pad facing
forward.
Important! The dial pad must face
forward, or the battery will not charge.
While charging the first time, the display
may show PLEASE REGISTER. Be
sure to let the battery charge for 10
hours, and then register the cordless
handset as explained on the following
page.
The cordless handset and charger may feel warm while charging. This is
normal.
The battery cannot be overcharged. When not using the cordless handset,
keep it in the charger to ensure that it is always charged.
When the battery needs charging, LOW BATTERY will appear in the display
and you will hear beeps during a phone conversation. Place the cordless
handset in the charger and let it charge.
Note: If the battery is extremely low, nothing may appear in the display during
the first several minutes that the cordless handset is in the charger. The
battery will begin to charge normally after several minutes.
Walkie-Talkie capability
Two cordless handsets can be used for walkie-talkie like communication. The
talking range of the cordless handsets is 400 m (line of sight; talking range
may decrease depending on transmission conditions), and there is no need
to be in the talking range of the fax machine.
Talking range (distance from fax machine) for phone calls
The talking range of the cordless handset for phone calls is approximately
400 m (line of sight; talking range may decrease depending on transmission
conditions) from the fax machine. If you hear noise or interference while
talking, move closer to the fax machine.
When outside the talking range, OUT OF RANGE appears in the display. If
you move out of the talking range while talking on the cordless handset,
the handset will beep and you may hear interference.
Large metal objects,
metal structures, and
thick walls reduce the
talking range.
4
Charge the battery
at least
the first time!
Aluminum sash
Metal
Reinforced concrete
10
hours

Advertisement

Table of Contents
loading

Table of Contents