Sharp FO-A760 Operation Manual page 53

b. Place the left ends so that the
shafts of the gears fit into the
holders.
6
Turn the front gear in the direction
shown until the film is taut.
7
Close the print compartment cover.
•
Press down on the
both sides of the cover to make sure
it clicks into place.
Cleaning the Print Head and Rollers
8
Cleaning the housing
Wipe the external parts and surface of
the machine with a dry cloth.
Caution: Do not use benzene or
thinner. These solvents may damage or
discolor the machine.
About the lithium battery:
The machine uses a lithium battery to
retain settings and information
programmed in the machine when the
marks on
power is turned off. Battery power is
consumed primarily when the power
is off. With the power kept
continuously off, the life of the battery
is about 5 years. If the battery dies,
have your dealer or retailer replace it.
Do not try to replace it yourself.
Close the operation panel.
49