Sharp FO-A660 Operation Manual page 10

UP and DOWN arrow keys
7
Enlarge/reduce setting: When making a copy of a document, press these
keys to select an enlarge/reduce setting (page 71).
Volume setting: When a document is not in the feeder, press these keys to
change the speaker volume when the
ringer volume at any other time (page 25).
FUNCTION key settings: Press these keys after pressing the FUNCTION
key to scroll through the FUNCTION MODE settings.
Number keys
8
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
Panel release
9
Press this release to open the operation panel.
STOP key
10 10
Press this key to cancel an operation before it is completed.
COPY/POLL key
11 11
Press this key to make a copy of a document (page 71). This key is also used
after dialling to poll (request fax transmission from) another machine (page
80).
START/MEMORY key
12 12
Press this key after dialling to begin fax transmission (page 50). Press this key
before dialling to send a fax through memory (page 59).
SPEAKER key
13 13
Press this key to listen to the line and fax tones through the speaker when
faxing a document (page 50).
Left and right arrow keys
14 14
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers (page 55), the "REVIEW
CALLS" list (only available if you have Caller ID; page 74), and the last
number dialled (redial; page 57).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.
FUNCTION key
15 15
Press this key followed by the arrow keys to select special functions and
settings.
8
key has been pressed, or the