Specifications - Sharp HT-X1W Operation Manual

Specifications

HT-X1W
ENGLISH
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
" Main unit
Dimensions Including the stand
Width: 430 mm (17")
Height: 192 mm (7-5/8")
Depth: 100 mm (4")
Excluding the stand
Width: 430 mm (17")
Height: 171 mm (6-3/4")
Depth: 88 mm (3-1/2")
Weight 2.2 kg (4.9 lbs.)
Frequency range FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
Video output terminals Video output: RCA type 1
S-video output: S-terminal 1
Component video output: RCA type 3
(Y/PB/PR)
Audio output terminal Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Audio input terminals Audio input (AUX): RCA type 2
Optical digital input: Square type 1
Other terminal System control 2
Signal system PAL/NTSC
Supported disc types DVD (region number 4 or ALL),
DVD-R/RW (video mode),
DVD+R/RW (video mode),
super video CD, video CD, audio CD,
CD-R, CD-RW
Video signal Horizontal resolution: 500 lines
S/N ratio: 70 dB
E-65
Audio Frequency Linear PCM DVD:
signal characteris-
4 Hz to 22 kHz (sampling rate: 48 kHz)
tics
4 Hz to 44 kHz (sampling rate: 96 kHz)
CD: 4 Hz to 20 kHz
S/N ratio CD: 96 dB (1 kHz)
Dynamic Linear PCM DVD: 95 dB
range
CD: 94 dB
Total har- 0.006 % maximum
monic distor-
tion ratio
" Front speakers
Type Full range system (magnetic shield)
8 cm (3-1/8") speaker 1
Maximum input power 100 W
Rated input power 50 W
Impedance 4 ohms
Dimensions Width: 105 mm (4-1/8")
Height: 205 mm (8-1/8")
Depth: 105 mm (4-1/8")
Weight 0.9 kg (2.0 lbs.)/each
05/2/2 HT-X1W(LA)E7.fm
4
TINSZA048AWZZ