Table of Contents
Advertisement
Specifications
SD-AT100H
ENGLISH
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
„ General
Power source
AC 230 V, 50 Hz
Power consumption
75 W
Dimensions
Width: 450 mm (17-3/4")
Height: 152 mm (6")
Depth: 119 mm (4-11/16")
Weight
4.8 kg (10.6 lbs.)
Terminals
Front speakers, Centre speaker, Surround speakers and
Subwoofer: 4 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Monitor output: S-video/video
Subwoofer Pre Out: 10 kohms
Digital output: Optical
Digital input (AV 3): Optical
AV Terminal [AV 1 (TV)]: SCART type
AV Terminal (AV 2): SCART type
S-video input (AV 3): S-terminal
Video input (AV 3): RCA type
Audio input (AV 3): RCA type (L/R)
„ Amplifier
Amplification system
64fs 1-bit switching (Remarks: fs = 44.1 kHz)
Output power
Front speakers:
RMS: 50 W (25 W + 25 W) (10 % T.H.D., 1 kHz)
Centre speaker:
RMS: 25 W (10 % T.H.D., 1 kHz)
Surround speakers:
RMS: 50 W (25 W + 25 W) (10 % T.H.D., 1 kHz)
Subwoofer:
RMS: 25 W (10 % T.H.D., 100 Hz)
A/D noise shaping
7th-order
E-71
(delta - sigma) modulation
„ DVD/CD player
Type
1-disc vertical type compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Signal system
NTSC/PAL
„ Tuner
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
„ Front speaker
Type
2-way type speaker system (Magnetic shield)
80 mm (3-1/8") Woofer
40 mm (1-5/8") Tweeter
Maximum input power 50 W
Rated input power
25 W
Impedance
4 ohms
Dimensions
Width: 110 mm (4-3/8")
Height: 195 mm (7-11/16")
Depth: 134 mm (5-5/16")
Weight
1.0 kg (2.2 lbs.)/each
01/11/16
SD-AT100H(H)E8.fm
Advertisement
Table of Contents
