To Change The Audio Language (Audio Output); To Brighten An Image - Sharp HT-X1W Operation Manual

Useful operation (continued)
HT-X1W
ENGLISH

! To change the audio language (audio output)

During playback, you can change the audio language (audio out-
put).
1
Whilst a disc is playing, press
the SHIFT button and then the
AUDIO button.
2
Repeat step 1 to select the desired audio number.
When playing DVD, the language changes as follows:
Audio 1/3: AC-3 5.1 English
Audio 2/3: AC-3 2CH English
When playing super video CD, video CD, audio CD and MP3,
the sound changes as follows:
Mono Left
Mono Right
Stereo
Notes:
" The audio language on some DVDs may not be changed.
" For audio language and audio system, refer to the manual of the
disc.
" When you set the unit to the stand-by mode or replace the disc,
settings return to the default.
E-31

! To brighten an image

1
During
SHIFT button and then the GAM-
MA button to select "ON".
Audio language information
"ON" and "OFF" will be switched by each press of these but-
tons.
2
Within 10 seconds, press the
Audio 1/3: AC-3 5.1 English
cursor ( or ) button to set the
level.
OFF
1: Original <English>
ON
(Dolby Digital 5.1 ch Surround)
2: English To restore the original brightness:
(Dolby Digital 2 ch Surround) In step 1, select "OFF".
05/2/2
playback, press the
Level Setting Level
Normal image ON
Slightly brighter ON
HT-X1W(LA)E4.fm
G OFF
G ON
Setting
Brighter
A lot brighter
TINSZA048AWZZ