Sharp HT-X1W Operation Manual page 57

Setting Selectable parameters
(* indicates initial set-
tings.)
Video Video Interlace* The video output mode should be set according to the connected TV type.
Setup output Progres-
Interlace:
sive
Progres-
sive:
Picture Auto Select a mode to optimise DVD, super video CD or video CD images on a TV.
mode Film
Auto:
Video
Film:
Smart*
Video:
Smart:
Display Angle mark On* Select whether to display " " (On) or not (Off).
Setup Off
Screen On Select whether to use a screen saver (On) or not (Off).
saver Off*
On:
Off:
System Parental Level: Sets a restriction level for DVD viewing.
Setup setting
1 Level 1 - 8: The level 1 is the least strict, and the level 8 is the strictest (restriction differs
8
Please en- No Limit:
No Limit*
ter a 4-digit
password. Code: Set a country code according to a parental control level of discs.
(Default
USA
setting:
6629)
Australia*
Password ---------- Password setting.
Edit
Restore ---------- This resets all settings to the factory defaults.
Info
Description
Select this for a non-progressive scan TV (use a video cable, S-video cable,
or component video cable).
Select this for a progressive scan TV (use a component video cable).
Images are automatically optimised according to the video source.
Suitable for progressive video output. Select for DVD movies, etc.
Suitable for interlaced video output. Select for DVD karaoke, super video
CD, video CD, etc.
Optimise special effects for progressive video output.
Press the button. After 5 minutes or more of inactivity, a screen saver ap-
pears.
To turn off the screen saver on the screen, press any button on the main
unit or remote control.
Cancel the screen saver setting.
depending on the country).
Parental level control is cancelled.
05/2/2 HT-X1W(LA)E6.fm
HT-X1W
ENGLISH
Refer-
ence
page
P. 19
P. 34
P. 57
7
P. 57
P. 57
E-56
TINSZA048AWZZ