To Change The Audio Language (Audio Output); To Brighten An Image - Sharp HT-M750H Operation Manual

Useful operation (continued)
HT-M750H
ENGLISH

To change the audio language (audio output)

During playback, you can change the audio language (audio out-
put).
1
Whilst a disc is playing, press
the SHIFT button and then the
AUDIO button.
2
Repeat step 1 to select the desired audio number.
When playing DVD, the language changes as follows:
Audio 1/3: AC-3 5.1 English
Audio 2/3: AC-3 2CH English
When playing super video CD, video CD, audio CD, MP3, WMA
and DivX , the sound changes as follows:
Mono Left
Mono Right
Stereo
Notes:
The audio language on some DVDs may not be changed.
For audio language and audio system, refer to the manual of the
disc.
When you set the unit to the stand-by mode or replace the disc,
settings return to the default.
The audio language of DivX files can be switched as MP3 files.
However, it may change like DVD ("Audio 1/3", "Audio 2/3",
"Audio 3/3"...) depending on the recording method.
E-29
Audio language information
Audio 1/3: AC-3 5.1 English
1: Original <English>
(Dolby Digital 5.1 ch Surround)
2: English
(Dolby Digital 2 ch Surround)

To brighten an image

1
During playback, press
SHIFT button and then the GAM-
MA button to select "ON".
"ON" and "OFF" will be switched by each press of these but-
tons.
2
Within 10 seconds, press the
cursor ( or ) button to set the
level.
Level Setting
OFF Normal image
ON Slightly brighter
To restore the original brightness:
In step 1, select "OFF".
the
OFF
G
ON
G
Level Setting
ON Brighter
ON A lot brighter