Specifications - Sharp HT-M700H Operation Manual

Specifications

HT-M700H
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
Main unit
Power source
Power consumption
Dimensions
Weight
Speaker terminals
Rated power output
65
AC 230 - 240 V, 50 Hz
Power on: 66 W
Power stand-by: 0.8 W
Width: 430 mm (17")
Height: 70 mm (2-3/4")
Depth: 310 mm (12-1/4")
4.0 kg (8.8 lbs.)
Front speakers, centre speaker,
surround speakers and subwoofer:
more than 8 ohms
Front speakers:
RMS: 100 W
(50 W + 50 W, 10 % T.H.D., 1 kHz)
Centre speaker:
RMS: 50 W (10 % T.H.D., 1 kHz)
Surround speakers:
RMS: 100 W
(50 W + 50 W, 10 % T.H.D., 1 kHz)
Subwoofer:
RMS: 50 W (10 % T.H.D., 100 Hz)
Frequency range FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
Video output terminals SCART output: SCART terminal 1
Video output: RCA type 1
S-video output: S-terminal 1
Audio output terminal Headphones: 16 - 50 ohms (recom-
mended: 32 ohms)
Audio input terminals Audio input (AUX): RCA type 2
Optical digital input: Square type 1
Signal system PAL
Supported disc types DVD (region number 4 or ALL),
DVD-R/RW (video mode), DVD+R/RW
(video mode), super video CD, video
CD, audio CD, CD-R, CD-RW, JPEG,
DivX
Video signal Horizontal resolution: 500 lines
S/N ratio: 70 dB
Audio Frequency Linear PCM DVD:
signal characteris-
4 Hz to 22 kHz (sampling rate: 48 kHz)
tics
4 Hz to 44 kHz (sampling rate: 96 kHz)
CD: 4 Hz to 20 kHz
S/N ratio CD: 96 dB (1 kHz)
Dynamic Linear PCM DVD: 95 dB
range
CD: 94 dB
Total har- 0.006 % (max.)
monic distor-
tion ratio