To Start Playback From The Desired Point (Direct Play) - Sharp HT-M700H Operation Manual

Basic operation (continued)
HT-M700H
To start playback from the desired point (direct
play)
To select and play the desired title:
Playback starts from chapter 1 of the selected title.
1
In the stop mode or during playback, press the DIRECT
button.
2
Within 10 seconds, select the title by pressing the cursor
( or ) button.
3
Enter the desired title number by using
the direct number buttons.
4
Within 10 seconds, press the ENTER button.
To select and play the desired chapter:
1
Perform steps 1 - 3 of "To select and play the desired title"
above.
2
Within 10 seconds, select the chapter by pressing the cur-
sor ( or ) button.
3
Enter the desired chapter number by
using the direct number buttons.
4
Within 10 seconds, press the ENTER button.
Notes:
Direct play feature is disabled on some discs.
Some discs may not display the chapter number.
25
Entering title or chapter numbers using the direct number buttons:
If the number is 2 digits or more, press "+10" and enter the number.
Example:
To select chapter 1, press "1".
To select chapter 12, press "+10" and "2".
To select chapter 22, press "+10", "+10" and "2".
To select chapter 112, press "+10" eleven times and press "2".
Title number
To play by specifying time (time search):
1
Whilst a disc is playing, press the DIRECT button.
01 / 08
2
Within 10 seconds, select the time by
pressing the cursor ( or ) button.
3
Specify the time by using the direct number buttons.
To specify 1 hour 23 minutes and 40 seconds, enter
"012340".
If you enter the wrong number, start over from step 1.
4
Within 10 seconds, press the ENTER button.
Chapter number
Notes:
Some discs cannot play from the specified point.
Time search feature is disabled on some discs.
001 / 010 --:--:--
Time
001 / 010 --:--:--