Setting The Network - Sharp AR-PB8 Operation Manual

SETTING THE NETWORK

Use the following procedure to set the network if the optional Print Server Card is installed:
DATA
ON LINE MENU ITEM
DATA
ON LINE MENU
DATA
ON LINE MENU
DATA
LINE MENU ITEM
1
ENTER
2
ITEM ENT
3
ITEM ENT
4
ENTER
Press the LINE key to switch the printer
to the offline mode.
Press the MENU key to display the
Network Menu.
Press the ITEM key to display the
required item.
This example shows setting the IP address. The
procedure for setting the subnet mask and default
gateway is similar.
Press the Left or Right arrow key to
change "Off " to "On".
*
27