Download Print this page

Sharp AR-D15 Service Manual

Laser printer options paper feed unit with power supply unit

Advertisement

Quick Links

AR-D15
AR-D20
[1]
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[2]
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[3]
EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . 3 - 1
[4]
UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 4 - 1
[5]
ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1
PARTS GUIDE
[1] INTRODUCTION
This model is provided with the power unit, AR-DC1, as a standard unit together with the 3-stage paper feed desk, AR-D14, or the large capacity paper
feed desk, AR-D13, for the AR-350/450 series, improving serviceability when installing.
This Service Manual, therefore, describes only the different points from the AR-D14/AR-D13.
For the items which are not described in this manual, refer to the AR-D14/AR-D13 Service Manual and Parts Guide.
Parts marked with "
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
CONTENTS
" are important for maintaining the safety of the set.
SHARP CORPORATION
CODE : 00ZARD20//A1E
LASER PRINTER OPTIONS
P APER FEED UNIT
WITH POWER SUPPL Y UNIT
MODEL
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
AR-D15
AR-D20

Advertisement

loading

Summary of Contents for Sharp AR-D15

  • Page 1 CODE : 00ZARD20//A1E AR-D15 LASER PRINTER OPTIONS P APER FEED UNIT AR-D20 WITH POWER SUPPL Y UNIT AR-D15 AR-D20 MODEL CONTENTS INTRODUCTION ........1 - 1 SPECIFICATIONS.
  • Page 2 32.2W or lower Power supply unit Requires the option power unit, AR-DC1. Standard provision External dimensions(W x D x H) 619 x 664 x 404 (mm) Occupied dimensions(W x D) 745 x 664 (mm) Weight Approx. 32kg Approx. 32.9kg AR-D15/D20 SPECIFICATIONS 2-1...
  • Page 3 32.2W or lower Power supply unit Requires the option power unit, AR-DC1. Standard provision External dimensions(W x D x H) 619 x 664 x 404 (mm) Occupied dimensions(W x D) 745 x 664 (mm) Weight Approx. 34kg Approx. 34.5kg AR-D15/D20 SPECIFICATIONS 2-2...
  • Page 4 No. 4 tray rear edge size PWB No. 4 tray rear edge size detection edge size PWB Power supply Power supply unit Supplies power to the desk and Equivalent to the AR-DC1. unit finisher series options. AR-D15/D20 EXTERNAL VIEWS AND INTERNAL STRUCTURES 3-1...
  • Page 5 MP tray rear edge size PWB Multi-purpose tray rear edge size detection edge size PWB Power supply Power supply unit Supplies power to the desk and finisher Equivalent to the unit series options. AR-DC1. AR-D15/D20 EXTERNAL VIEWS AND INTERNAL STRUCTURES 3-2...
  • Page 6 Then remove the power plug from the outlet. Notch [Note] When placing the printer on "OFF" the AR-D15, be sure to place the harness bundle in the notch in the desk rear cabinet in order not to pinch 2) Attach the adjusters and adjust them.
  • Page 7 Process the harness cover as shown in the illustration. Screw Cut out. Harness cover <2>Connect the optional power supply harness connector to CN11 (red connector) of the PCU PWB of the main unit of the printer. Connector CN11 AR-D15/D20 UNPACKING AND INSTALLATION 4-2...
  • Page 8 Caution: The lower tray cannot be pulled out unless the adjuster is lowered to the specified position. Screw Screw Rear mounting plate Rear mounting plate Desk frame Caution: Insert the rear mounting plates under the desk frame. AR-D15/D20 UNPACKING AND INSTALLATION 4-3...
  • Page 9 (with the specified-line label) (with the specified-line label) Paper guide R Paper guide Paper guide L If another peripheral device must be installed, carry out the following step at the end of the installation work. AR-D15/D20 UNPACKING AND INSTALLATION 4-4...
  • Page 10: Actual Wiring Chart

    S-GND DHRY2 TEST PHR-3 PHR-11 CN-F OPTION +24V(VB) +24V(VB) P-GND P-GND DCPS VD(+5V) VD(+5V) GND2 GND2 S-GND S-GND TXD-DSK TXD-DSK RXD-DSK/ RXD-DSK/ DTR-DSK/ DTR-DSK/ DSR-DSK/ DSR-DSK/ RES-DSK RES-DSK TRC-DSK TRC-DSK/ N.C. SMR-11V-B PHDR-12VS-1 2nd Control PWB AR-D15/D20 ELECTRICAL SECTION 5-1...
  • Page 11 AC N B2P3-VH-R B2P3-VH CN-F CN-C +24V(VB) AC L DH PWB P-GND VD(+5V) AC N (OPTIONALY) GND2 B2P3-VH S-GND TXD-DSK RXD-DSK/ DTR-DSK/ DSR-DSK/ SCN UN RES-DSK TRC-DSK/ N.C. SMR-11V-B PHDR-12VS-1 2nd Control PWB PRINTER UN ELR-02VF ELP-02 AR-D15/D20 ELECTRICAL SECTION 5-2...
  • Page 12 DHRY2 S-GND TEST PHR-11 CN-F CN-G OPTION +24V(VB) +24V(VB) P-GND P-GND DCPS +5V(VD) +5V(VD) GND2 GND2 S-GND S-GND TXD-DSK TXD-DSK RXD-DSK/ RXD-DSK/ DTR-DSK/ DTR-DSK/ DSR-DSK/ DSR-DSK/ RES-DSK RES-DSK TRC-DSK/ TRC-DSK/ TAN Control PWB N.C. SMR-11V-B PHDR-12VS-1 AR-D15/D20 ELECTRICAL SECTION 5-3...
  • Page 13 AC N B2P3-VH-R B2P3-VH CN-F CN-C +24V(VB) AC L DH PWB P-GND +5V(VD) AC N (OPTIONALY) GND2 B2P3-VH S-GND TXD-DSK RXD-DSK/ DTR-DSK/ DSR-DSK/ SCN UN RES-DSK TRC-DSK/ TAN Control PWB N.C. SMR-11V-B PHDR-12VS-1 PRINTER UN ELR-02VF ELP-02 AR-D15/D20 ELECTRICAL SECTION 5-4...
  • Page 14: Circuit Diagram

    FC41/43 Not installed CND-14,16,20 TLUD1(DLUD1) CNE-1,5,7,11 120J1/4W MCLUD CNI-6 (DCSS11) MCPWS2 CNE-13 (DCSS15) R143 CNI-1,4,7 (DCSS14) JP102 CNJ-4,7 (DCSS13) CNK-6 (DCSS12) FC41/43 Not installed CNL-6 (DCSS22) CNM-10 120J1/4W CNA-6 R134 CNM-6 D203 D205 D204 DAP202K DAP202K AR-D15/D20 ELECTRICAL SECTION 5-5...
  • Page 15 C106 C109 R189 C101 C118 C113 C111 C114 C135 C133 C131 C138 C121 C137 C130 C125 C107 C105 C123 D203 D205 D204 FC41/43 R188,R189 1MJ Installed DAP202K DAP202K DAP202K : Not installed FC42 C122,C123 222Z Installed AR-D15/D20 ELECTRICAL SECTION 5-6...
  • Page 16 /RES MOTOR WRITER DCSS23 /RXD /RXD DLUM1 DCSS13 S-GND DCSS12 DCSS22 /TXD /TXD DETEC DSPD1 DCSS11 DCSS21 CLOCK OUT CLOCK OUT S-GND VD(+5V) S-GND +5V(VD) +5V(VD) FVpp FVpp *3T Only *3T Only S-GND S-GND TEST TEST AR-D15/D20 ELECTRICAL SECTION 5-7...
  • Page 17 DHRY1 DHRY1 WRITER /RXD /RXD DHRY2 DHRY2 /TXD /TXD CLOCK OUT CLOCK OUT +5V(VD) +5V(VD) FVpp FVpp S-GND S-GND CN-C CN-D CN-E CN-F TEST TEST CN-G CN-B CN-H CN-I CN-A CN-J CN-N CN-M CN-L CN-K TopView AR-D15/D20 ELECTRICAL SECTION 5-8...
  • Page 18 B. Power Supply PWB (100V series) AR-D15/D20 ELECTRICAL SECTION 5-9...
  • Page 19 C. Power Supply PWB (200V series) AR-D15/D20 ELECTRICAL SECTION 5-10...
  • Page 20 PARTS GUIDE [ 注 ] 本パーツガイドは、AR-MU1/AR-D13/AR-D14/AR-DC1 からの変更点のみを記載しています。 AR-MU1/AR-D13/AR-D14/AR-DC1( 資料コード:00ZARMU1//P1/) を合わせて活用下さい。 [Note] The AR-D15/AR-D20 Parts Guide discribes only changed from AR-MU1/AR-D13/AR-D14/AR-DC1. For the common parts, please refer to the AR-MU1/AR-D13/AR-D14/AR-DC1 Parts Guide (Code:00ZARMU1//P1/). 補修部品のランク付 市場における補修部品の在庫管理が、適正に運営出来る手助けとなることを、目的とします。 Aランク : メンテナンスパーツ、メンテナンスパーツには入っていないがメンテナンスパーツに近い消耗パーツ。 Bランク : 性能・機能パーツ ( センサー、クラッチ等の電気パーツ )、消耗パーツ。...
  • Page 21 外装部 (Exteriors) FCP06162 左ドア (Left door) PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 2 MSPRC2915FCZ2 左ドア従動スプリング Left door follower spring 13 PGIDM1944FCZ1 デスク左ドア PG Desk left door PG 左ドア (Left door) FCP06163 – 2 –...
  • Page 22 フレーム 1(Frame 1)[AR-D15] PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 20 PGUMS0294FCZ1 アジャスターゴム板 Adjuster rubber plate 21 LPLTP5831FCZ1 アジャスターホイール Adjuster wheel( 80) 29 PCOVP1588FCZ1 左アジャスターカバー Left adjuster cover 32 LPLTP5831FCZ1 アジャスターホイール Adjuster wheel( 80) フレーム 1(Frame 1)[AR-D15] FCP06164 フレーム 2(Frame 2)[AR-D15]...
  • Page 23 フレーム 1(Frame 1)[AR-D20](Except Japan) PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 24 LPLTP5831FCZ1 アジャスターホイール Adjuster wheel( 80) 26 PGUMS0294FCZ1 アジャスターゴム板 Adjuster rubber plate 29 PCOVP1588FCZ1 左アジャスターカバー Left adjuster cover 42 LPLTP5831FCZ1 アジャスターホイール Adjuster wheel( 80) フレーム 1(Frame 1)[AR-D20](Except Japan) FCP06166 フレーム...
  • Page 24 タンデムカセット (Tandem cassette)[AR-D20](Except Japan) PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 1 CPLTP5837FC01 タンデム規制板 L Tandem regulation plate L 3 CPLTP5838FC01 タンデム規制板 R Tandem regulation plate R 35 NPLYZ0400FCZZ ワイヤープーリー Wire pulley 56 PGIDM1920FCZ5 タンデム給紙下 PG L Tandem paper feed lower PG L 61 MSPRD2910FCZ2 トレイリフト補助スプリング...
  • Page 25 Transfer roller 56 NSFTZ2622FCZ2 マルチ分離ローラー軸 Multi separation roller shaft 58 PGIDM1913FCZ1 マルチ出紙 PG Multi paper exit paper guide マルチ給紙 (Multi paper feed) FCP06170 多段給紙 (Paper feeding section)[AR-D15] PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 29 NSFTZ2622FCZ2 マルチ分離ローラー軸 Multi separation roller shaft 59 PGIDM1915FCZ1 マルチ...
  • Page 26 18 PCLC-0310FCZ1 5K クラッチ 5K clutch(W) 21 PCLC-0311FCZ1 5K クラッチ 5K clutch(B) 32 LHLDW1009ACZZ ミニクランプ Mini clamp(UAMS-05S-2) マルチ駆動 (Multi drive) FCP06172 多段駆動 (Drive section)[AR-D15] PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 7 PCLC-0310FCZ1 5K クラッチ 5K clutch(W) 11 PCLC-0311FCZ1 5K クラッチ...
  • Page 27 MARK RANK 12 PCLC-0311FCZ1 5K クラッチ 5K clutch(B) 23 PCLC-0310FCZ1 5K クラッチ 5K clutch(W) タンデム駆動 (Tandem drive section)[AR-D20](Except Japan) FCP06174 梱包 & 付属品 (Packing Material & Accessories)[AR-D15] PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 3 SSAKZ0020FCZZ ポリ袋 Vinyl bag 4 PCOVP1588FCZ1 左アジャスターカバー...
  • Page 28 梱包 & 付属品 (Packing Material & Accessories)[AR-D20](Except Japan) PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 2 PCOVP1588FCZ1 左アジャスターカバー Left adjuster cover 5 LPLTP5831FCZZ アジャスターホイール Adjuster wheel 9 SPAKC6433FCZZ タンデム個装ケース Tandem packing case 11 SSAKZ0020FCZZ ポリ袋 Vinyl bag 12 CPLTP5837FC01 タンデム規制板...
  • Page 29 3T コントロール基板 (3T Control PWB)[AR-D15] PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 1 0EUUNT27C013B CPU unit [IC101] CPU 2 QCNCM0877FCZZ [CND] コネクター Connector(20pin) 3 QCNCM0923FC12 [CNF] コネクター Connector(12pin) 4 QCNCM0923FC16 [CNE] コネクター Connector(16pin) 5 QCNCM2401SC0B [CNG] コネクター Connector(2pin) 6 QCNCM2401SC0F [CNL] コネクター...
  • Page 30 索引 (Index) PRICE R. JAPAN ONLY PARTS CODE NEW P/R ORDER CODE QCNCM0923FC16 PRICE R. 572 510 0868 JAPAN ONLY PARTS CODE NEW P/R QCNCM2401SC0B ORDER CODE 595 510 0089 AA DD " 595 510 0089 AA DD QCNCM2401SC0F CFRM-1041FC33 595 510 0782 572 213 2174 6- 34...
  • Page 31 CAUTION FOR BATTERY DISPOSAL (For USA,CANADA) Contains lithium-ion battery. Must be disposed of properly. Remove the battery from the product and contact federal or state environmental agencies for information on recycling and disposal options.
  • Page 32 COPYRIGHT 2002 BY SHARP CORPORATION All rights reserved. All rights reserved. All rights reserved. Printed in Japan. Printed in Japan. Printed in Japan. No part of this publication may be reproduced, No part of this publication may be reproduced, No part of this publication may be reproduced,...

This manual is also suitable for:

Ar-d20