Installing Display Font; Installing Resident Font Information (Ppd For Windows 95/Windows 98 Only) - Sharp AR-PB2A Operation Manual

Installing Display Font

The AR-PB2A PRINTER UTILITIES CD-ROM contains display fonts for displaying on the computer
screen. If the display fonts have been installed, the print image can be checked properly on the
screen.
To install these display fonts, use the installer in the CD-ROM described on page 7 and select
Display Font when selecting the drivers and utilities to be installed. Then, follow the instructions on
your screen.
NOTES To use the display fonts for the PPD driver, install the resident font information for the PPD. See the next section.
The fonts listed in Table 8-1 (page 65) are provided as display fonts.
Installing Resident Font Information
(PPD for Windows 95/Windows 98 only)
If you have installed the PPD printer driver for Windows 95/Windows 98, install the resident font
information following the procedure below.
NOTES Before installing the resident font information, be sure to install the printer driver.
When installing the resident font information, be sure to close all other open applications.
If you have changed the port for the printer from Properties of the printer driver when the printer is used as a
network printer, reinstall the resident font information.
If printer resident fonts cannot be specified from application software, the resident font information has not been
installed or the information is not proper. In this case, reinstall the resident font information.
1. Start Windows.
2. Insert the supplied PRINTER UTILITIES CD-ROM into a CD-ROM drive.
•
If your computer is configured for auto start, the license agreement will be displayed. Click the
'Cancel' button.
3. On the 'Start' menu, click 'Run'.
4. Enter the CD-ROM drive and "Option\English\9x_psppd\Pfmsetup.exe". Then click the 'OK' button.
Example: If the CD-ROM drive is designated as drive Q, type "Q:\Option\English\9x_psppd\
Pfmsetup.exe" and click 'OK'.
5. Click the 'OK' button.
•
If the printer driver has not been installed, installation of the resident fonts will not be performed.
6. Click the 'OK' button.
7. After the resident fonts have been installed, restart Windows.
PRINTING FROM A COMPUTER IN THE WINDOWS ENVIRONMENT
13