Windows 95 With Plug & Play (Parallel Connections Only) - Sharp AR-PB2A Operation Manual

PRINTING FROM A COMPUTER IN THE WINDOWS ENVIRONMENT
7. Select the desired printer drivers and utilities to be installed by clicking the check boxes.
•
If a printer driver or a printer utility (except NW Setup and Display Font) is highlighted by clicking the
icon or the name part, you can select the 'README display' button to display the information on the
highlighted driver or utility.
•
Printer Administration Utility, Printer Status Monitor, and NW Setup can be used only if the printer is
used as a network printer. See the installation requirements on pages 17, 20, and 22 before
installing them.
8. Click the 'Next' button.
•
The list of the printer drivers and utilities to be installed will appear.
9. Click the 'Start' button.
10. Follow the instructions on your screen to install the selected printer drivers and utilities.
11. When installation is complete, the message "Setup has finished installing your selected
package(s)." will appear. Click the 'Close' button.
12. If restart of the computer is requested, click 'Yes'.
•
Restart of the computer may be needed depending on the program to be installed and the system
configuration.
Windows 95 with Plug & Play (parallel connections only)
When using Windows 95 with plug & play*, follow the procedure below.
* The plug & play feature is effective if both the computer and peripheral equipment are equipped
with IEEE 1284 compliant parallel interface.
1. Ensure that the printer cable is connected between your computer and the printer and then turn on
the printer.
2. Start Windows on your computer.
NOTE Before installing the printer driver, be sure to close all other open applications.
•
If you use Windows 95 on a personal computer with the plug & play feature, the 'Update
Device Driver Wizard' window will appear. If the 'New Hardware Found' window appears,
follow the procedure below:
(1) Click the 'Driver from Disk Provided by Hardware Manufacturer' button and then click 'OK'.
(2) When the 'Install From Disk' window appears, insert the PRINTER UTILITIES CD-ROM into
a CD-ROM drive. Specify the path shown in Table 2-2 and click the 'OK' button.
•
If your computer is configured for auto start, the license agreement will be displayed.
Click the 'Cancel' button.
(3) Proceed to step 4.
8