Enhancing Your System - Sharp GX-CD5100W Operation Manual

Enhancing your system

The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
VCR, DVD, etc.
To the line
output sockets
Red
White
■ Listening to playback sounds of VCR, DVD, etc.
1
Connect a VCR, DVD, etc. to the CD/LINE INPUT sockets.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the LINE IN button.
4
Play the connected equipment.
You can enjoy sounds from the supplied speakers.
■ To record on a tape from VCR etc.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the LINE IN button.
3
Press the
4
Press the
CD/LINE INPUT
RIGHT LEFT
5
Play the VCR, etc.
■ Headphones
● Before plugging in or unplugging the headphones, reduce the vol-
ume.
● Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Red White
● Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
RCA lead
(not supplied)
04/1/28
button.
or button.
CX-GD5100V_EN2.fm
GX-CD5100W
27