Listening To A Cassette Tape (Tape 1 Or Tape 2) - Sharp GX-CD5100W Operation Manual

Listening to a cassette tape (TAPE 1 or TAPE 2)

GX-CD5100W
Before playback:
● For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
● Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
● Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-
by mode after 15 minutes of inactivity.
■ Tape 1 playback (one side)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 1.
3
Open the cassette compartment by pushing the area
marked " ".
4
Load a cassette into the TAPE 1 cassette compartment
with the side to be played facing towards you.
5
Press the button to start
playback.
20
■ Continuous playback (TAPE 1 to TAPE 2)
1
Press the area marked " " and load cassettes into the
TAPE 1 and TAPE 2 cassette compartments.
2
Press the TAPE (1
3
Press the CONTINUOUS PLAYBACK
4
Press the TAPE 1
● Playback begins from side A on TAPE 1, the playback se-
quence will be as follows:
TAPE 1 side A → TAPE 2 side A → TAPE 2 side B → stop
To stop playback:
Press the button.
To cancel continuous playback:
Press the CONTINUOUS PLAYBACK
indicator will disappear.
Note :
This function cannot be operated from TAPE 2.
■ Tape 2 playback (two sides)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1
3
Open the cassette compartment by pushing the area
marked " ".
4
Load a cassette into the TAPE 2 cassette compartment with
side A facing you.
5
Press the
side or both sides.
... To listen to both sides.
To play both sides ( ), start from side A. When play-
back starts from side B, side A will not be played.
...For endless repeat play of both sides.
...To listen to one side.
6
Press the
Forward play
Tape play indicator
To change the side of tape:
Press the or
04/1/28
2) button to select TAPE 1.
button.
button to start playback.
button again and "
2) button to select TAPE 2.
button on the remote control to choose one
button to listen to side A, or the button for side B.
Reverse play
button during playback.
CX-GD5100V_EN2.fm
"