Table of Contents
Advertisement
Listening to a CD (CDs) (continued)
CD-XP250E
! Repeat play
All tracks on up to 3 discs, or a programmed sequence can be continuously
repeated.
To repeat all tracks on up to 3 discs:
Press the
/
(
) button twice.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed play" section and then press the
button twice.
To cancel repeat play:
Press the
/
(
) button again.
" " will go out.
! Random play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random
play.
To cancel random play:
Press the
button.
Notes:
" If you press the
button during random play, you can move to the track
selected next by the random operation. On the other hand, the
not allow you to move to the previous track. The beginning of the track being
played will be located.
" In random play, the CD player will select and play tracks automatically. (You can-
not select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
disc(s) will play continuously.
16
! Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press one
of the
1 -
control to select the desired disc.
2
Press the
select the desired track.
You can also select a track by pressing the
control.
/
(
)
3
Press the MEMORY/SET (MEMORY) button to save the track number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be pro-
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
5
Press the
To clear the programmed selections:
Press the CLEAR button on the remote control whilst the
"MEMORY" indicator is lit.
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed. When all the
tracks are cleared, "MEMORY" will disappear.
Adding tracks to the programme:
button does
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
" Opening the disc tray automatically cancels the programmed sequence.
" Even if you press the ON/STAND-BY button to enter the stand-by mode or change
button. Otherwise, the
the function from CD to another, the programmed selections will not be cleared.
" During programme operation, random play is not possible.
Selected disc number
3 buttons on the remote
/
or
/
button to
Selected track number
or
button on the remote
Playback order
/
(
) button to start playback.
02/5/30
CD-XP250E(E)2.fm
Advertisement
Table of Contents
