Repeat Or Random Play; To Specify A Disc To Play (Cd Only); Switching The Time Display - Sharp CD-MD3000H Operation Manual

Repeat or Random Play

You can select one of the CD or MD playback mode; "Repeat play", "Random play"
and "Normal play".
1
When in the CD or MD mode, press the PLAY MODE button re-
peatedly to select the playback mode.
Repeat playback mode
Normal playback mode
2
(CD operation)
Press the 06 06 or one of the DISC 1 - DISC 6 buttons to start
06 06
06
playback.
or
If playback is started by pressing the 06 button, repeat or random play will
be performed on all discs.
If playback is started by pressing one of the DISC 1 - DISC 6 buttons, repeat
or random play will be performed on that disc.
(MiniDisc operation)
Press the 06 06 button.
06 06 06
To repeat a programmed sequence:
Perform steps 1 - 6 in the "Programmed Play" section and then select the repeat playback.
Notes:
After using repeat play, be sure to press the
play continuously.
CD random play will be repeated until the
MD random play will stop automatically when all tracks are played once.
(The same track will not be played back twice.)
In random play, the CD or MiniDisc player will select and play tracks automatically.
(You cannot select the order of the tracks.)
To cancel repeat or random play:
Press the PLAY MODE button repeatedly to select the normal playback mode.
To Specify a Disc to Play
You can play a disc by specifying the disc number.
When in the CD mode, press one of the DISC 1 - DISC 6 buttons to
select the desired disc.
Random playback mode
Note:
When one of the DISC 1 - DISC 6 buttons is green, it is ready to play that disc.
If there is not a disc on the tray, playback will not begin and the button will turn dark.
To stop playback:
Press the

Switching the Time Display

Each time the TIME button on the remote control is pressed during playback or in the
pause mode, the display will change.
button. Otherwise, the disc(s) will
button is pressed.
Notes:
Selected disc number
Only the chosen disc will be played and stopped automatically.
button.
The elapsed playing time for the current track will be
displayed.
The remaining playing time for the current track will
be displayed.
The total remaining playing time for the disc will be
displayed.
During random play, the total remaining playing time will not be displayed.
Depending on the CD or MiniDisc, the playing time display may not match the total
playing time which is indicated on the CD or MiniDisc jacket, as the time between
tracks is not included.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
(CD only)
23