Table of Contents
Advertisement
! To locate the beginning of a track
To move to the beginning of the next track:
Press the
/
button for less than 0.5 seconds during playback.
" You can skip to any track by pressing the
sired track number appears.
To restart the track being played:
Press the
/
button for less than 0.5 seconds during playback.
" You can skip to any track by pressing the
sired track number appears.
Notes:
" You can locate the beginning of a track on a single disc only.
" The
or
button on the remote control allows you to locate the begin-
ning of a track.
! To locate the desired portion
For audible fast forward:
Press and hold down the
/
button during playback.
For audible fast reverse:
Press and hold down the
/
button during playback.
Notes:
" Normal playback will resume when the
" You can locate the desired portion on a single disc only.
" When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
" The
or
button on the remote control allows you to locate the desired
portion.
! Starting playback with a desired track
You can play a disc starting with the desired track.
1
/
button repeatedly until the de-
2
/
button repeatedly until the de-
3
Notes:
" When the DISC SKIP button is pressed during playback, the next disc will begin
" When one of the
/
or
/
button is released.
Caution:
" Do not place two CDs in one disc tray.
" Do not play discs with special shapes (heart- or octagon-shaped). It may cause
" Do not push the disc tray whilst it is moving.
" Do not turn the disc tray by hand. This may cause malfunctions.
" If the power fails whilst the tray is open, wait until the power is restored.
" If the disc tray is stopped forcibly, "ER-CD10" will appear on the display for 3 sec-
" If TV or radio interference occurs during CD operation, move the unit away from
" If a disc is damaged, dirty, or loaded upside down, the disc will skip.
Whilst in the stop mode, press one of the
remote control or DISC SKIP button to select the desired disc.
Press the
/
or
/
button to select the desired track.
Selected disc number
Selected track number
You can also select a track by pressing the
control.
Press the
/
(
) button to start playback.
Playback of the selected track is started. When the end of last track of the disc
selected is reached, the next disc will be automatically started.
automatically.
1 -
3 buttons on the remote control is pressed during play-
back, the selected disc will begin automatically.
malfunctions.
onds and the unit will not function. If this occurs, press the ON/STAND-BY button
to enter the power stand-by mode and then turn the power on again.
the TV or radio.
02/5/30
CD-XP250E(E)2.fm
CD-XP250E
1 -
3 buttons on the
or
button on the remote
15
Advertisement
Table of Contents
