Table of Contents
Advertisement
Starting Playback with a
Desired Track
You can play a disc starting with the desired track.
1
Whilst in the stop mode, press one of the 1 - 3 buttons or DISC
SKIP button to select the desired disc.
2
Press the
PRESET
or
desired track.
Selected track number
You can also select a track by pressing the
/
button on the remote control.
3
Press the
(
) button to start playback.
Playback of the selected track is started. When the end of last track of the disc
with the selected track is reached, the next disc will be automatically started.
To stop playback:
Press the
button.
Notes:
z When the DISC SKIP button is pressed during playback, the next disc will begin
automatically.
z When one of the
1 -
3 buttons is pressed during playback, the selected disc
will begin automatically.
Selected disc number
PRESET
button to select the
PRESET /
or PRESET
Repeat or Random Play
„ Repeat Play
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the
(
) button twice.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed Play" section and then press the
button twice.
To cancel repeat play:
Press the
(
) button again.
" " will go out.
„ Random Play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random
play.
To cancel random play:
Press the
button.
Notes:
z If you press the PRESET
/
the track selected next by the random operation. On the other hand, the
SET /
button does not allow you to move to the previous track. The begin-
ning of the track being played will be located.
z In random play, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
disc(s) will play continuously.
button during random play, you can move to
button. Otherwise, the
ENGLISH
(
)
PRE-
E-16
Advertisement
Table of Contents
