HP StorageWorks All-in-One SB600c - Storage Blade User Manual page 73

Object Alert text
A manual
remirror is
required.
Replication
target is not
consistent with
the source.
Replication
transmission
paused.
Replication
target down or
unavailable.
This system no
longer
supports
replication.
Underlying
storage not
found.
Could not get
source
instance
information for
this instance.
No system is
replicating to
this replication
target.
The replication
license for this
system expired
(or will expire)
on <date>.
Description Possible cause
The contents of the
replication target
changed outside of
normal replication.
The replication target
does not contain the
same information as
the source.
Transmission to the
replication source was
manually paused in
the StorageWorks
Storage Mirroring
Management Console.
The replication target
service is not running
or is unavailable.
StorageWorks
Storage Mirroring was
removed from the
replication target or
source.
No storage target
could be discovered
for a replication set.
The target system
cannot contact the
source system.
A replication target
exists on a target
system but there are
no replication sets
using it as a target.
HP StorageWorks All-in-One Storage Manager
Solution
Use the StorageWorks
Storage Mirroring
Management Console to
initiate a mirror operation
manually.
Use the StorageWorks
Storage Mirroring
Management Console to
initiate a mirror operation
manually.
Use the SWSM
Management Console to
start transmission
manually.
Verify the target service is
running and that any
network problems
between the source and
target are resolved.
Install SWSM.
Contact HP support.
Verify that the target DNS
settings are correct and
that it can resolve the
source system's fully
qualified domain name
(FQDN).
Obtain a valid license key
and use the StorageWorks
Storage Mirroring
Management Console to
enter the new license key.
73