Smbus Controller - Gigabyte MSH61DK User Manual

SMBus Controller

Enable/Disable onboard SMBus controller.
Options available: Enabled/Disabled. Default setting is Enabled.
Restore AC Power Loss
This option provides user to set the mode of operation if an AC / power loss occurs.
Power On:
System power state when AC cord is re-plugged.
Power Off: Do not power on system when AC power is back.
Last State: Set system to the last sate when AC power is removed.
Options available: Power On/Power Off/Last State. Default setting is Power Off.
SLP_S4 Assertion Stretch Enable
Enable/Disable SLP_S4 Assertion Stretch.
Options available: Enabled/Disabled. Default setting is Enabled.
SLP_S4 Assertion Width
Configure SLP_S4 Assertion Width.
Options available: [1-2 Seconds]/[2-3 Seconds]/[3-4 Seconds]/[4-5 Seconds].
Default setting is [4-5 Seconds].
Deep Sx & Disable WOL from S5
Deep Sx configuration. If this item set to enabled, the WOL from S5 will be disabled.
Note: Mobile platforms support Deep S4/S5 in DC only and Desktop platforms support Deep S4/S5 in
AC only.
Options available: Disabled/Enabled in S5/Enabled in S4 and S5.
Default setting is Enabled in S4 and S5.
- 49 - BIOS Setup