2-4
Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the drive(s) specified is not bootable.
Setup Prompt Timeout
Define Setup Prompt start unit command timeout.
Press numeric keys to adjust desired values.
Bootup NumLock State
Allows you to select power-on state for NumLock function.
Options available: On/Off. Default setting is On.
Quick Boot
Allow BIOS to skip certain tests while booting.
Options available: Enabled/Disabled. Default setting is Enabled.
Fast Boot
Enable/Disable boot with initialization of a minimal set of devices required to launchactive boot option.
Options available: Enabled/Disabled. Default setting is Enabled.
CSM16 Module Version
Displays the CSM16 Module Version information.
GateA20 Active
Upon Request: GA20 can be disabled using BIOS services.
Always: do not allow disabling GA20; this option is useful when any RT code is executed above 1MB.
Options available: Upon Request/Always. Default setting is Upon Request.
BIOS Setup
- 53 -