For Wired Network Interface Users; Connect The Network Cable - Brother MFC-J825DW Quick Setup Manual

Wired Network

For wired network interface users

®
(Windows XP Home/XP Professional/Windows Vista
16
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
IMPORTANT
If there are any programs running, close them.
Note
• The screens may differ depending on your
operating system.
• The CD-ROM includes ScanSoft™
PaperPort™12SE. This software supports
®
Windows XP Home (SP3 or greater), XP
Professional x32 Edition (SP3 or greater), XP
Professional x64 Edition (SP2 or greater),
®
Windows Vista
®
Windows 7. Update to the latest Windows
Service Pack before installing MFL-Pro Suite.
17
Connect the network
cable
a
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
20
(SP2 or greater) and
® ®
/Windows 7)
b
You will find the LAN socket marked with a
symbol inside the machine on the left as shown
below. Remove the protective cap and connect
the network cable to the LAN socket.
c
Carefully guide the network cable into the cable
channel and out the back of the machine.
®
Connect the cable to your network.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both the USB and the LAN cables are being
used, guide both cables through the cable
channel with one on top of the other.
Windows
USB
®