Sending An E-Mail Securely; Configuration Using Web Based Management (Web Browser); Sending An E-Mail With User Authentication - Brother MFC-J6510DW Network User's Manual

Security features

Sending an E-mail securely

Configuration using Web Based Management (web browser)

You can configure secured E-mail sending with user authentication on the Web Based Management screen.
a
Start your web browser.
b
Type "http://printer's IP address/" into your browser (where "printer's IP address" is
the printer's IP address).
 For example:
http://192.168.1.2/
c
Enter a password in the Login box, and then click
d
Click Network.
e
Click Protocol.
f
Click Advanced Setting of POP3/SMTP and make sure that the status of POP3/SMTP is Enable.
g
You can configure the POP3/SMTP settings on this page.
Note
• For more information, see the Help text in Web Based Management.
• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.
h
After configuring, click Submit. The Test E-mail Send/Receive Configuration dialog appears.
i
Follow the instructions on-screen if you want to test with the current settings.

Sending an E-mail with user authentication

This machine supports POP before SMTP and SMTP-AUTH methods to send an E-mail via an E-mail server
that requires a user authentication. These methods prevent an unauthorized user from accessing the E-mail
server. You can use Web Based Management, BRAdmin Professional 3 and Web BRAdmin to configure
these settings. You can use POP before SMTP and SMTP-AUTH methods for E-mail Notification, E-mail
reports and Internet fax sending.
E-mail server settings
You need to match the settings of SMTP authentication method with the method used by your E-mail server.
Contact your network administrator or your ISP (Internet Service Provider) about the E-mail server
configuration.
You will also need to check SMTP-AUTH of SMTP Server Authentication Method to enable the SMTP
server authentication.
.
8
8
8
8
54