Maintenance; Specifications - Sharp CD-E800W Operation Manual

Maintenance

CD-E800W
! Cleaning the tape-handling parts
" Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
TAPE 1
TAPE 2
Playback head
Capstan
Pinch roller
" After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
31

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
B
C
A
Power source
Power
consumption
Dimensions
C B E B C
D
Weight
Erase head
! Amplifier
Recording/Playback head
Output power
Output terminals
Input terminals
03/8/27
AC 110/127/220/230 - 240 V, 50/60 Hz
140 W
Width: 270 mm (10-5/8")
Height: 330 mm (13")
Depth: 355 mm (13-15/16")
8.8 kg (19.4 lbs.)
MPO: 620 W (310 W + 310 W) (10 % T.H.D.)
RMS: 340 W (170 W + 170 W) (10 % T.H.D.)
RMS: 280 W (140 W + 140 W) (0.9 %
T.H.D.)
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
Microphone: 1 mV/600 ohms
CD-E800W(A)3.fm
TINSE0908AWZZ