Listening To A Cassette Tape (Tape 2) - Sharp CD-E800W Operation Manual

Listening to a cassette tape (TAPE 2)

1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 2.
3
Open the cassette door by pushing the area marked "PUSH
EJECT ".
4
Load a cassette into the TAPE 2
cassette compartment with side A
facing you.
5
Press the button to choose one
side or both sides.
... To listen to both sides.
... For endless repeat play of both sides.
... To listen to one side.
6
Press the ( ) button to listen to side A, or the
[(TAPE-2) ] button for side B.
To play both sides ( ), start from side A. When playback starts
from side B, side A will not be played.
To stop playback:
Press the button.
Fast forward/rewind on side A:
To advance the tape, press the
the button.
Fast forward/rewind on side B:
To advance the tape, press the
the button.
Caution:
" To remove the cassette, press the
compartment.
" Before changing from one tape operation to another, press the
button.
" If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
03/8/27 CD-E800W(A)2.fm
CD-E800W
button. To rewind it, press
button. To rewind it, press
button, and then open the
20
TINSE0908AWZZ
6