Sharp CD-E800W Operation Manual page 23

" To change the audio mode
Sound of the playback source can be switched among the STE-
REO, L-CH, R-CH, and V-CANCEL (VOCAL CANCEL) modes.
The audio mode function is used when the left and right channels
have individual signals from each other.
Press the KARAOKE MODE button on the
remote control until the desired audio
mode is displayed.
Each time the KARAOKE MODE button is
pressed, the mode will change as follows:
STEREO L-CH R-CH
STEREO Sounds on the left and right channels are played.
L-CH Sounds on the left channel only are played.
R-CH Sounds on the right channel only are played.
V-CANCEL The main vocal is lowered.
Notes:
! The initial audio mode setting is "STEREO".
! In any mode other than the STEREO mode, " " will appear.
! The setting will remain unchanged when you change the disc,
you set the unit to the stand-by mode or the function is changed
from the CD to another function.
! When playing a sound multiplexed disc on which a vocal and
music have been separately recorded, select the audio mode as
desired.
" To change general stereo source to karaoke
source
Even ordinary discs and tapes not recorded specifically for karaoke
can be used for karaoke just by toning down the main vocal.
Press the KARAOKE MODE button on the remote control until
"V-CANCEL" appears in the display.
" " will appear.
Notes:
! Use discs recorded in stereo. The function will not work with
mono sources.
! With some discs and tapes the original vocals may still be heard.
Notes on sound multiplexed karaoke discs:
Sound multiplexed karaoke discs are discs on which the main vocal
and the BGM (Background music) have been recorded on one of
V-CANCEL
the two channels and only the BGM on the other.
! The function will not work properly with discs which do not belong
to this group.
! Discs on which vocal has been recorded on the left channel and
music on the right may not play properly.
" Recording of mixed sound to a cassette tape
You can record mixed sound from the microphone and CD, TUNER,
TAPE 1 or VIDEO/AUX.
1 Perform steps 1 - 3 in "Playing karaoke" on page 21.
2 Press the CD, TUNER (BAND), TAPE (1
button to select the audio source.
3 Load a cassette into the TAPE 2 cassette compartment with side
A facing you.
4 Perform steps 5 - 7 in "Playing karaoke" on page 21.
5 Press the button to choose one side or both sides.
6 Press the REC PAUSE (TAPE-2
7 Press the (
2) ] button for side B.
" Recording of the microphone signals only to a
cassette tape
1 Perform step 1 above.
2 Press the TAPE (1
play.
3 Perform steps 3 - 7 above.
03/8/27
2) or VIDEO/AUX
) button.
) button to record on side A, or the [(TAPE-
2) button until "TAPE 2" appears on the dis-
CD-E800W(A)3.fm
TINSE0908AWZZ
CD-E800W
7
22