Listening To A Cassette Tape (Tape 1) - Sharp CD-E800W Operation Manual

Listening to a cassette tape (TAPE 1)

CD-E800W
Before playback:
" For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
19
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 1.
3
Open the cassette door by pushing the area marked "PUSH
EJECT ".
4
Load a cassette into the TAPE 1
cassette compartment with the
side to be played facing toward
you.
5
Press the ( ) button to start playback.
To stop playback:
Press the button.
Note:
You cannot fast-forward or rewind the cassette in the TAPE 1 com-
partment.
03/8/27 CD-E800W(A)2.fm
TINSE0908AWZZ