Filter Installation - Sharp FU-60SE-P Operation Manual

PREPARATION

FILTER INSTALLATION

To maintain the quality of the filters, they are placed in the main unit within plastic
bags. Be sure to remove the filters from the plastic bags before using the unit.
1
Filter Removal
1
Place the unit facing up.
Lay the unit on a flat surface
such as a table, making sure not
to pinch the power cord on the
rear of the unit.
2
Remove the Front Panel.
Press in the hook on the bottom
of the front panel and lift to re-
move.
3
Pull out the Filter Frame and
remove the Pre-Filter and
Filter Separator.
4
Remove the Active Carbon
Filter (black) and HEPA Fil-
ter (white) from the plastic
bags.
• Be sure to remove the power plug from the wall outlet.
Be sure to remove the power plug from the wall outlet.
2
Hook
1
Filter Frame
Pre-Filter
Filter Separator
Active Carbon Filter
HEPA Filter
Filter Frame
E-8
Table
Soft cloth
1
Front Panel
2
1