Accessories - Sharp FU-40SE Operation Manual

Cluster ion operation is selected using the remote control.
Blue light
When the cluster ion operation is in the Clean mode or AUTO cluster ion mode and the
air in the room is dirty, the light turns on and the unit will operate in the Clean mode.
Green light
When the cluster ion operation is in the Refresh mode or AUTO cluster ion mode and
the air in the room is dirty, the light turns on and the unit will operate in the Refresh
mode.
Light off
No cluster ions are generated.
If the lamp is bright when sleeping, or if the ion generation noise is irritating, turn off the
cluster ion operation.
ABOUT THE DUST SENSOR
• The dust sensor displays a clean sign de-
pending on the relative change of the envi-
ronment at the time the power plug is in-
serted in the wall outlet and after.
• When the air is extremely dirty at the time
the power plug is inserted, the dust senor
display may light green since the polluted
state is the environment which the sensor
bases the pollution rate on. In this case,
switch to manual operation.
BACK
CLUSTER ION LAMP
Handle
Exhaust port
Power cord
Power plug

ACCESSORIES

Remote control
(1 units)
Battery
(AA battery X
2 units)
When using on tabletop
Stand
(1 unit)
Thumbscrew
(2 units)
Located on
bottom of
stand
When using this product to a wall
Wall mounting
bracket 1
Wall mounting
bracket 2
Wood screw
(4 units)
Small screw
(2 units)
Cushions
(2 units)
E-5