Table of Contents
Advertisement
PLAYING A DISC
Basic Playback
DVD
Getting started
•
Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
•
Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
•
When you play NTSC recorded discs the default setting con-
verts this to a modified PAL (see page 19 "Display Settings").
1
Press OPERATE.
• "P-ON" will appear briefly on the dis-
play panel.
2
Press OPEN/CLOSE to open disc
loading tray.
3
Place the chosen disc in the tray,
with the label facing up.
4
Press PLAY.
• The tray will close automatically, and playback will then
start from the first chapter or track of the disc. If the
playback does not start automatically, press PLAY.
• When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to "TITLE MENU".
5
Press STOP to stop playback.
NOTES:
• A "prohibited icon" may appear at the top-
right on the TV screen during operation, warning that a
prohibited operation has been encountered by the DVD
player or the disc.
• With DVDs that use some titles for playback pro-
gramme signals, playback may start from the second
title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• A DVD-RW disc recorded in the VR mode may freeze
momentarily during playback depending on how the
playlist was made and edited (deleted titles, repeated
recording).
CD
DVD-RW
VCD
VR mode
General Features
DVD or Video CDs may contain menus to navigate the disc
and access special features. Press the appropriate numerical
key or use Arrow ( L / K / B / s ) to highlight your selection
in the DVD main menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use.
Cancelling PBC* (for playback of a Video CD)
1
Insert a Video CD. (Playback will start automatical-
ly.)
2
Press STOP.
3
Enter track number of your choice with the
numerical key pad.
4
PBC is now cancelled and the playback of the
Video CD will start.
*
What is PBC?
"PBC" stands for the PlayBack Control. You can play interac-
tive software using a menu screens. Refer to instructions of
Video CD.
Pause
DVD
CD
1
During playback, press STILL/PAUSE.
• Playback will pause and sound will be muted.
2
To continue playback, press PLAY.
Disc Menus
1
Press MENU.
• The DVD main menu will appear.
2
If the feature is not available,
appear on the TV screen.
3
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
4
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
– 12 –
MP3
DVD-RW
VCD
VR mode
symbol may
DVD
EN
Advertisement
Table of Contents
