Changing The On-Screen Display; Marker Setup Screen; Digital Gamma Setting; Virtual Surround - Sharp DV-SL10S(Y Operation Manual

PLAYING A DISC

Changing the On-Screen Display

You can check information about the current disc by pressing
ON SCREEN on the remote control.
1 Press ON SCREEN during
playback to show current
Chapter.
• The elapsed and remaining playing time of the current
chapter will be displayed.
2
Press ON SCREEN again to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3
Press ON SCREEN again.
• The BIT RATE and the current repeat setting will be
displayed.
• If you are playing a dual layered disc, the layer number
will also be displayed ( L0: Layer 0 is playing. L1: Layer
1 is playing).
If you are playing a DVD-RW with
setting the PLAYLIST, the follow-
ing will also be displayed.
ORG: Playing the ORIGINAL.
PL: Playing the PLAYLIST.
4
Press ON SCREEN the fourth time to remove the
display.
1 Press ON SCREEN during playback, the current
Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2
Press ON SCREEN again to show current Total
Track.
• The elapsed and remaining playing time of the current
total track will be displayed.
3 Press ON SCREEN again to remove the display.
DVD DVD-RW
VR mode
Use markers to memorise your favourite places on a disc.
9/49 0:00:00 -0:00:00
NOTES:
IIII
T ORG
CD VCD
without PBC function
DIGITAL GAMMA is a digital image quality enhancement
function that gives a richer image by brightening the darker
and more obscure portions of the image without altering the
brightness of the brighter portions, thereby making the entire
image easier to see. Three digital gamma settings are avail-
able to allow for differences in the images played and in
brightness of the room.
You can enjoy stereophonic visual space on your existing
stereo system.
NOTE (for CD or VCD play only):
– 18 –

Marker Setup Screen

DVD
1
Press MARKER during playback.
• The display screen and Markers will appear on the TV
screen.
2 Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or
10 and ensure that "- : - - : - -" appears in the dis-
play.
3 When reaches the desired point, press ENTER.
• Selected number will turn to
marked.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4 To return to the Marker later, press MARKER dur-
ing playback and s or B to choose the desired
marker (one of the
• Opening the disc tray or turning off the power or select
"AC" (All Clear) at step
all Markers.
• To clear a marker, using s or B, position the cursor on
to the marker number to be cleared and press CLEAR.
• You can mark up to 10 points.
5
Press MARKER or RETURN to exit.

Digital Gamma Setting

1 Press GAMMA during playback.
• The current setting appears.
2
Press ENTER to switch 1,2,3,OFF.
1,2,3 : Makes the dark parts
brighter.
OFF : Shows the original picture as recorded or
GAMMA.
3
Press RETURN or GAMMA to exit.

Virtual Surround

DVD CD
1 Press MODE during playback.
2
Press ENTER to set it
1(Natural effect),
2(Emphasized effect) or OFF.
3 Press MODE or RETURN to exit.
• Virtual Surround will not be effective if the sound mode
is set to something other than STEREO.
Turn down the level or turn it "OFF" if the sound is
•
distorted.
CD DVD-RW VCD
VR mode without PBC
function
and the point will be
, then press ENTER.
mark)
2
and press ENTER will erase
DVD DVD-RW VCD
VR mode
1
MP3 DVD-RW VCD
VR mode
OFF
EN