Table of Contents
Advertisement
PLAYING A DISC
Basic Playback
DVD
DVD-RW
Getting started
• Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD player.
• Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
1
Press POWER.
• "P-ON" will appear briefly on the display panel.
2
Press OPEN/CLOSE to open disc
loading tray.
3
Place the chosen disc on the tray, with
the label facing up.
4
Press PLAY.
• The tray will close automatically, and
playback will then start from the first chapter or track of
the disc. If the playback does not start automatically,
press PLAY.
• When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to "TITLE MENU".
5
Press STOP to stop playback.
NOTES:
• A "prohibited icon" may appear at the top-right
on the TV screen during operation, warning
that a prohibited operation has been encoun-
tered by the DVD player or the disc.
• With DVDs that use some titles for playback program
signals, playback may start from the second title, or it
may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• A DVD-RW disc recorded in the VR mode may freeze
momentarily during playback depending on how the
playlist was made and edited (deleted titles, repeated
recording).
General Features
DVD may contain menus to navigate the disc and access
special features. Enter an appropriate number or use Arrow
o
p
/ s / B) to highlight your selection in the DVD main
(
/
menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
Pause
DVD
DVD-RW
1
During playback, press PAUSE.
• Playback will pause and sound will be muted.
2
To continue playback, press PLAY.
NOTE:
• Set STILL MODE to FIELD on the Display menu if pictures
in the pause mode are blurred. (Refer to page 16.)
CD
MP3
VR mode
CD
MP3
VR mode
– 10 –
Disc Menus
1
Press MENU.
• The DVD main menu will appear.
2
If the feature is not available,
the TV screen.
3
If disc menu is available on the disc, audio language,
subtitle options, chapters for the title and other options
will appear for selection.
o
p
/ s / B) to select an item, and
4
Press Arrow (
/
ENTER to confirm selection.
Title Menu
1
Press TOP MENU.
• The title menu will appear.
2
If the feature is not available,
on the TV screen.
o
p
/ s / B) to select an item, and
3
Press Arrow (
/
ENTER to confirm selection.
• Playback will begin at the selected Title.
To call up a menu screen during playback
• Press MENU to call up the DVD main menu.
• Press TOP MENU to call up the title menu.
NOTE:
• Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
Step by Step Playback
1
During playback, press PAUSE.
• Playback will pause and sound will be muted.
2
The disc goes forward by one frame each time PAUSE is
pressed.
3
To exit step by step playback, press PLAY.
NOTE:
• Set STILL MODE to FIELD on the Display menu if pictures
during step by step playback are blurred. (Refer to page16.)
Rapid Play
Available only on discs recorded in the Dolby Digital format,
Rapid Play plays back in slightly faster/ slower speed while
keeping the sound quality as in the normal playback.
1
During playback, press MODE.
• The current setting appears.
2
Press ENTER to switch among
: Plays back approximately
at 0.8 times of normal playback.
: Plays back approximately at 1.3 times of normal
playback.
3
To return to normal playback, press PLAY.
NOTES:
• Audio (language) setting cannot be changed while
using this mode.
• Virtual Surround and Black Level settings cannot be
changed while using this mode.
• Virtual Surround does not function while using this mode.
• This feature may not work at some point in a disc.
• When using digital audio connection (COAXIAL), the
PCM sound will be output.
DVD
symbol may appear on
DVD
symbol may appear
DVD
DVD-RW
VR mode
DVD
(x1.3),
(x0.8) and OFF.
EN
Advertisement
Table of Contents
